Step-Down Butt Splices with Colored Heat Shrink by Pacer Group
Step-Down Butt Splices with Colored Heat Shrink by Pacer Group
Step-Down Butt Splices with Colored Heat Shrink by Pacer Group
Step-Down Butt Splices with Colored Heat Shrink by Pacer Group
Step-Down Butt Splices with Colored Heat Shrink by Pacer Group

Step-Down Butt Splices with Colored Heat Shrink by Pacer Group

Regular price$1.20
/

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

In an electrical system, there may be times where you will need to connect one wire to multiple wires. Alternatively, you may need to connect two different gauge wires together. It is situations like this where you would use step down butt splices with colored heat shrink. Heat shrink butt splices protect against the elements in the most challenging of environments. They offer the best moisture protection available. These step down heat shrink butt splices have an adhesive liner. This liner provides a durable, rugged, environmentally sealed connection for wires between 18 AWG - 14 AWG. It protects from physical abuse and abrasion, water, salt, and other corrosive compounds. Step down butt splices join two wires to one. The colored dash on the tubing indicates the wire size for the connector. A red band means that the splice accepts 20-18 AWG wire. A blue one indicates 16-14 AWG. A yellow band means tells that the splice will accept 12-10 AWG wire. These butt splices offer superior protection, strain relief and durability, all in one package.

Step down Heat Shrink butt splices are used to connect different gauge wires together. They are also used to connect multiple wires of the same size. So, you could connect a 10 gauge wire to a 12 AWG wire or connect a 12 AWG wire to two 12 AWG wires. The first step is to make sure you have properly stripped the wires to the correct length. If you look inside the butt splice you will see an indentation your wires should butt up against. Also, be careful to make sure that the butt splice and the wires insulation are touching. If not, you run the risk of weakening the connection. Next, the stripped wire is inserted into one side of the butt splice and crimped with the proper tool. This crimp bends the connector around the wire. This crimp creates a solid connection. On the other side, we'll add two wires. After crimping, perform the tug test to make sure the wires don't pull out Once your wire has passed the test, apply heat to the heat shrink working outward. Be careful not to burn the butt splice or the wire insulation. Now you've created a durable, environmentally protected connection. Remember, Butt splices are useful for their rapid installation and durability. Other methods of connection may not offer the same level of protection.

FEATURES:
-Protects terminations from water, condensation, salt -spray and corrosion
-Added vibration protection in rugged environments
-Provides strain relief

COMPLIANCES:
-UL
-CSA
-RoHS

CHARACTERISTICS:
-Shrink Ratio: Approx. 3:1 at 135 °C
-Operating Temp: -55 °C - 125 °C
-Vol. Resistivity: 1015 Ohm-cm3
-Dielectric Strength: 900-V/mil
-Voltage Rating: 600-V

You may also like


Recently viewed