Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass
Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass
Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass
Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass
Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass
Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass

Striker AWD 2" Lift Kit (Complete) - Sprinter AWD (2023-Present 2500 Single Rear Wheel) by Van Compass

$2,709.00
/
Contact Us To Order
We do not typically keep this item in stock, but are still able to get it for you! Please contact us so we can help get your order set. It will not ship directly from FVG as we rely on our awesome vendors to help us out with shipping, but will be able to keep you up to date and informed about your order!

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

The Van Compass Striker AWD lift kit creates the clearance needed to fit larger tires and push deeper into back country landscapes with confidence in the increased capability. Through hours of careful development and design, we've created a system that lifts the van with as few compromises to the original design parameters of the vehicle as possible. Using a mix of machined and welded spacers, we move the front subframe to allow for the CVs, tie rods, and control arms to all cycle in their original geometry range set by Mercedes. At the rear, a taller version of our Mini Leaf Spring pack is paired with longer sway bar links, shock relocation brackets, and bump stop spacers to ensure that nothing binds, over-extends, or can over-compression on axle articulation. With proper wheel offset and fender trimming, fitment of a 35 x 12.50 tire is possible, for a huge increase in traction and ground clearance.

Included Components:
-Front 2" strut spacers
-Front 2" subframe drop spacers
-Engine and transmission mount 2" lift spacers
-Front differential re-clocking cams
-CNC Machined 2" steering shaft extension
-Low pressure power steering hose extension
-Front brake line relocation brackets
-6-leaf Mini Leaf Spring pack
-Extended rear sway bar links
-Rear lower shock relocation brackets
-Rear bump stop drop brackets
-Wind assist or headlight leveling sensor bracket
-All necessary hardware and detailed instructions

With this lift kit, 35 x 12.50 (315/70R17 equivalent) tires can be fitted with the following conditions met:

-Removal of the front mudflaps.
-Slight trimming to the rear of the front fender opening.
-Trimming of the front bumper and front inner fender well liner.
-Minimum 14mm wheel spacer (9/16") if retaining factory -54mm offset steel wheels. This is for tire clearance between the inside of the tire and the strut and rear inner fender.
-Aftermarket wheels with an additional 14mm offset.

You may also like

Recently viewed

Back to Mercedes Sprinter 2023 AWD Suspension Kits 2500