We do not typically stock this item. Please contact us to help get your order set!
*ONLY COMPATIBLE WITH 2WD VANS THAT HAVE A FACTORY 2 LEAF SPRING PACK. Not compatible with the factory 'mono leaf' or the 3500 spring pack with a third 'overload' spring.
When you build out your camper van, more and more weight will be added to your vehicle and the stock suspension may start to be overwhelmed by the additions. As your Mercedes Sprinter approaches its GVWR (Gross Vehicle Weight Rating), the rear suspension will naturally begin to sag and the ride quality will begin to suffer. The Van Compass Sprinter multi leaf spring pack installs under the factory leaf springs to correct sagging and lost wheel travel in the rear of a built up van.
The increase in spring rate gained by this leaf pack along with the additional clearance between the bump-stop and axle will reduce the chances of bottoming out and enhance vehicle stability, ride comfort and restore the factory look of the van. This product is designed to improve ride and handling while at or near GVWR, however we do not recommend exceeding the manufacturer's GVWR.
The mini spring pack can be installed one of 2 ways:
3-leaf Sag Correction: In the 3-leaf configuration, the factory suspension geometry is still preserved and functions well to restore lost ride height on heavy vans.
6-leaf for 2" of total lift: Our 6-leaf pack is perfect way to eliminate the lift block and add spring rate at the same time to one of our rear lift kits. The Striker or Scout rear lift kit is required for proper suspension geometry and cycling range in the 2" lift configuration.
Included Components:
- Van Compass mini leaf pack (pair)
- U-bolts and nuts for installation
Sprinter mini spring pack installation instructions:
Recommended Shop Labor Time: 3 Hours